granite hall samples sliding rack-sg2062
The SG2062 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
Showing 2381–2400 of 2720 resultsSorted by latest

The SG2062 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.

The SX2007 uses a modular rail system that accepts eight different sample holder types. Swap from tile brackets to plank shelves in about 15 minutes with nothing more than the included hex key.

Multi-category building material distributors face a constant challenge: how to display diverse products without buying separate display systems for each. The SX2008 solves that with modular, reconfig

Different plank widths create display chaos in multi-brand showrooms. The 88 accepts planks from 75mm to 300mm wide in the same frame, with tier spacing that adjusts independently per row.

The SG2060 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.

Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SRL701 slots accept the full thickness spectrum without adapter plates or shims.

Granite distributors appreciate that the 212 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.

We manufacture the 528 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.

Floor space in a retail showroom runs $20-50 per square foot. The RACK holds up to 18 full-size tile samples in roughly 4 square feet — less than a standard pallet.

Humidity in stone warehouses can be extreme. The RACK powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.

The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The RACK has gusseted corner plates and cross-braced rear panels that eliminate frame racking

Aluminum construction makes the MZ2109 roughly 60% lighter than equivalent steel display stands. Trade show teams can move and set up an entire mosaic display wall with two people.

Granite distributors appreciate that the SRL2026 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.

When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The SRL2030 presents each slab at a 7° tilt-back angle that keeps it stable without clamp

We manufacture the PY2016 with frame tolerances borrowed from industrial pallet racking. Not because display stands belong in warehouses, but because wobbling is unacceptable when presenting a $3,000

Granite distributors appreciate that the SG2076 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.

The WZ2014 frame is built around a reinforced steel spine that eliminates the center sag common on budget display racks. When loaded with dense hardwood, it stays perfectly level.

We plate the 29 with a zinc-phosphate corrosion barrier before powder coating. It is the same three-stage finishing process used on outdoor architectural steel, because showroom humidity is just as un

The FACTORY frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.

Granite distributors appreciate that the 194 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.