Factory Wholesale Customize MDF marble tile sample display board PF005-28
The rail system on the 28 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.
Showing 2421–2440 of 2720 resultsSorted by latest

The rail system on the 28 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.

Marble showrooms need display fixtures that match the elegance of the stone. The 26 matte black finish with clean geometric lines complements rather than competes with premium natural stone.

The 46 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service 4 ye

The 28 frame is engineered with a center of gravity 40% below the midpoint. Even with all sample panels pulled out simultaneously, the rack stays planted.

Granite distributors appreciate that the 61 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.

The 60 is built for showrooms that handle large-format porcelain slabs daily. Its frame geometry distributes weight evenly across the rail system so panels glide without binding, even when loaded to c

Each 73 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.

We plate the 59 with a zinc-phosphate corrosion barrier before powder coating. It is the same three-stage finishing process used on outdoor architectural steel, because showroom humidity is just as un

When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The 84 presents each slab at a 7° tilt-back angle that keeps it stable without clamping.

The 85 frame is engineered with a center of gravity 40% below the midpoint. Even with all sample panels pulled out simultaneously, the rack stays planted.

Granite distributors appreciate that the 82 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.

The 80 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.

We manufacture the 79 in our Xiamen facility where we control every step from steel procurement to final assembly. No subcontractors, no quality gaps.

The 77 frame starts as cold-rolled steel tube, cut and welded on CNC jigs to maintain consistent slot spacing across every unit. No shims, no field adjustments needed.

We manufacture the 72 in our Xiamen facility where we control every step from steel procurement to final assembly. No subcontractors, no quality gaps.

The rail system on the 70 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.

Designers and architects are the primary mosaic customer, and they make decisions based on subtle color differences. The MF012 positions samples at eye height with uniform lighting exposure.


We plate the MC1002 with a zinc-phosphate corrosion barrier before powder coating. It is the same three-stage finishing process used on outdoor architectural steel, because showroom humidity is just a

Contractors and homeowners make up most flooring showroom traffic. Neither group wants to dig through stacks. The 77 puts 20+ planks in a single sightline so customers scan your entire range without m


We engineered the SG006 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must no