Stone Display Stand

Quartz, granite, and marble each have different weight characteristics. The SRT759 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement a

Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The 38 slots accept the full thickness spectrum without adapter plates or shims.

We designed the SRL046 after studying how contractors browse door displays. They open, close, check the reveal, and inspect the hardware. The rack must support all of that without loosening over time.

We manufacture the SG1022 with frame tolerances borrowed from industrial pallet racking. Not because display stands belong in warehouses, but because wobbling is unacceptable when presenting a $3,000

We manufacture the SRL017 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.

Natural stone slabs are heavy, irregular, and expensive to replace. The SRL005 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.

We manufacture the SRL105 with frame tolerances borrowed from industrial pallet racking. Not because display stands belong in warehouses, but because wobbling is unacceptable when presenting a $3,000

Granite distributors appreciate that the SRL132 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.

The SRL930 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service