hot selling large slab ceramic tile sliding display stand
The STAND uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.
Showing 1–20 of 2886 resultsSorted by latest


The STAND uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.

Marble showrooms need display fixtures that match the elegance of the stone. The 2 matte black finish with clean geometric lines complements rather than competes with premium natural stone.

Quartz, granite, and marble each have different weight characteristics. The SRT759 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement a


Quartz, granite, and marble each have different weight characteristics. The DISPLAYS slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement

Designers and architects are the primary mosaic customer, and they make decisions based on subtle color differences. The MT922 positions samples at eye height with uniform lighting exposure.

We manufacture the SG2018 with frame tolerances borrowed from industrial pallet racking. Not because display stands belong in warehouses, but because wobbling is unacceptable when presenting a $3,000

Natural stone slabs are heavy, irregular, and expensive to replace. The SRL151 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.

The SD015 was field-tested for 18 months in a high-traffic Dubai showroom before we released the design. Every improvement between prototype and production came from watching real customers interact w

The 606 frame starts as cold-rolled steel tube, cut and welded on CNC jigs to maintain consistent slot spacing across every unit. No shims, no field adjustments needed.

Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The 941 uses a staggered front-to-back layout that shows every slab face from a single aisle.

The rail system on the CF2025 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.

Floor space in a retail showroom runs $20-50 per square foot. The CC091 holds up to 18 full-size tile samples in roughly 4 square feet — less than a standard pallet.

The 086 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service 4 y

Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The 38 slots accept the full thickness spectrum without adapter plates or shims.

Tile retailers tell us their customers make faster decisions when they can compare 6-8 slabs side by side. The 990 enables that comparison shopping experience without requiring a warehouse-sized showr

We manufacture the SHOWROOM with smooth-rolling industrial casters as standard because carpet showrooms rearrange their displays more often than any other flooring category.

The SD2003 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.

Quartz, granite, and marble each have different weight characteristics. The SG2010 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement a

The SG2015 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.

Humidity in stone warehouses can be extreme. The SG2019 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.