stone sample exhibition hall-2
Quartz, granite, and marble each have different weight characteristics. The 455 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement at t
Showing 2321–2340 of 2720 resultsSorted by latest
-
-
ceramic tile exhibition hall-2
We plate the 712 with a zinc-phosphate corrosion barrier before powder coating. It is the same three-stage finishing process used on outdoor architectural steel, because showroom humidity is just as u
-
carpet sample exhibition hall-1
Carpet samples are bulky, flexible, and easily damaged if stored improperly. The 334 was designed specifically for rolled and hanging carpet presentation — not adapted from a general-purpose rack.
-
stone sample exhibition hall-4
Granite distributors appreciate that the 792 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.
-
sanitary ware exhibition hall-1
Not every showroom sells a single product category. The 382 was designed for versatility — it handles tile, stone, wood, and laminate samples with equal reliability using interchangeable holder types.
-
mosaic tile exhibition hall-6
We pre-drill and tap every threaded insert on the 307 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.
-
granite exhibition hall shelves
We engineered the SG2072 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must n
-
sleek floor stands for showcasing granite panel rack-SRT905
Natural stone slabs are heavy, irregular, and expensive to replace. The RACK was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
-
mosaic sample countertop display stand-mt920
Mosaic sheets are small, colorful, and easily overlooked on generic display fixtures. The MT920 was purpose-built for mosaic presentation with close-set slots and a forward-tilt viewing angle.
-
custom mosaic tile countertop displays-mt920
Each MT920 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.
-
Exhibition hall Granite Stone Sample Waterfall Display Frame-SG1020
We manufacture the STAND in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
-
manufacturer recommended marble display stand-sd2030
Marble showrooms need display fixtures that match the elegance of the stone. The SD2030 matte black finish with clean geometric lines complements rather than competes with premium natural stone.
-
granite display ideas,granite display for sale-sd2007
The SD2007 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service
-
granite slab display racks,granite kitchen displays-sd2008
Quartz, granite, and marble each have different weight characteristics. The SD2008 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement a
-
danby marble sample slab rack/shelf-sd2010
Granite distributors appreciate that the SD2010 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.
-
granite slab display,granite showroom display-sd2012
When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The SD2012 presents each slab at a 7° tilt-back angle that keeps it stable without clampi
-
cultured marble samples countertop display racks-sd2014
Humidity in stone warehouses can be extreme. The SD2014 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
-
marble benchtop sample slab rack/shelf-sd2015
The SD2015 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
-
marble sample table slab display rack-sd2017
The SD2017 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service
-
brown marble sample slab display rack-sd2018
We manufacture the SD2018 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.