counter top portable rotatable tile display stand srt209
Showroom managers love the SRT209 because samples stay clean longer — the angled display means less dust settles on the tile faces, reducing daily cleaning time.
Showing 2741–2760 of 2886 resultsSorted by latest

Showroom managers love the SRT209 because samples stay clean longer — the angled display means less dust settles on the tile faces, reducing daily cleaning time.

We developed the MT918 after a Dubai mosaic distributor told us their biggest frustration: customers kept pulling sheets out of standard racks and dropping them. The enclosed-slot design eliminates lo

Door samples are among the heaviest products displayed in building material showrooms. The KK002 uses a triangulated support arm geometry that transfers weight directly to the floor through the main c

The slot liners on the STAND are made from EPDM rubber, the same material used in automotive weather seals. They do not harden, crack, or leave marks on your tile edges.

The SRT712 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.

The 5 frame starts as cold-rolled steel tube, cut and welded on CNC jigs to maintain consistent slot spacing across every unit. No shims, no field adjustments needed.

The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The 6 has gusseted corner plates and cross-braced rear panels that eliminate frame racking.

Each 2 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.

Granite distributors appreciate that the 1 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.

Window display requires transparency — the rack should be as invisible as possible. The KK007 uses minimalist clamping hardware and a dark matte finish that visually recedes behind glass and frame sam

Door samples are among the heaviest products displayed in building material showrooms. The KK005 uses a triangulated support arm geometry that transfers weight directly to the floor through the main c

Tile retailers tell us their customers make faster decisions when they can compare 6-8 slabs side by side. The 22 enables that comparison shopping experience without requiring a warehouse-sized showro

The 19 frame is engineered with a center of gravity 40% below the midpoint. Even with all sample panels pulled out simultaneously, the rack stays planted.

Assembly hardware for the 20 is all M8 stainless steel — standard size, won’t rust, and fits the hex key included in every box. Most showrooms have the rack up in under 20 minutes.

The rail system on the 17 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.

Tile samples look their best when customers can see the full face without bending or reaching. The 18 angles every panel slightly toward the viewer, reducing glare from overhead showroom lighting.

We manufacture the 16 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.

The slot liners on the 15 are made from EPDM rubber, the same material used in automotive weather seals. They do not harden, crack, or leave marks on your tile edges.

We manufacture the 14 in our Xiamen facility where we control every step from steel procurement to final assembly. No subcontractors, no quality gaps.

If your sales team spends more time fetching samples from the back than talking to customers, the 8 puts your entire collection at their fingertips — literally within arm’s reach of the consultation d