Showing 721–740 of 2886 resultsSorted by latest
The WT4009 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.
The WT4008 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.
The WT4004 frame is built around a reinforced steel spine that eliminates the center sag common on budget display racks. When loaded with dense hardwood, it stays perfectly level.
We designed the WT4007 after visiting 30+ tile showrooms and noticing the same bottleneck: staff wasting time lifting heavy sample boards. This rack lets one person reorganize an entire display wall i
We pre-drill and tap every threaded insert on the WT4006 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.
The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The EXHIBITION has gusseted corner plates and cross-braced rear panels that eliminate frame r
Tile retailers tell us their customers make faster decisions when they can compare 6-8 slabs side by side. The ML02 enables that comparison shopping experience without requiring a warehouse-sized show
We ship the WT4005 with spare felt pads and an extra hardware kit because we know showroom fixtures take abuse. Having spares on hand means zero downtime.
Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The RACK undergoes a 72-hour salt spray test before it leaves our facility.
We finish the MZ2063 in matte black as standard because it does not compete visually with tile colors. Custom RAL color matching is available for branded showroom environments.
We manufacture the MT927 on our dedicated aluminum fabrication line, which is rare among display rack manufacturers. Most competitors outsource aluminum work; we keep it in-house for quality control.
Showroom managers love the MZ2011 because samples stay clean longer — the angled display means less dust settles on the tile faces, reducing daily cleaning time.
Assembly hardware for the ML013 is all M8 stainless steel — standard size, won’t rust, and fits the hex key included in every box. Most showrooms have the rack up in under 20 minutes.
We pre-drill and tap every threaded insert on the MZ2095 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.
The MT917 frame starts as cold-rolled steel tube, cut and welded on CNC jigs to maintain consistent slot spacing across every unit. No shims, no field adjustments needed.
Natural stone slabs are heavy, irregular, and expensive to replace. The SHOW was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
We plate the 78 with a zinc-phosphate corrosion barrier before powder coating. It is the same three-stage finishing process used on outdoor architectural steel, because showroom humidity is just as un
The rail system on the BOOK uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.
Unlike welded display fixtures that ship in bulky crates, the RACK packs flat to roughly 12% of its assembled volume. This cuts your freight cost and simplifies receiving.
We designed the FOLDER after visiting 30+ tile showrooms and noticing the same bottleneck: staff wasting time lifting heavy sample boards. This rack lets one person reorganize an entire display wall i