Showing 481–500 of 2776 resultsSorted by latest
The SRT037 locking casters are TK-200 series — the same specification used in hospital equipment. Silent rolling, full-lock at pedal press, and rated for years of daily repositioning across hard floor
Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SRT260 slots accept the full thickness spectrum without adapter plates or shims.
Assembly hardware for the PB002 is all M8 stainless steel — standard size, won’t rust, and fits the hex key included in every box. Most showrooms have the rack up in under 20 minutes.
The SRT068 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
Assembly hardware for the SRT040 is all M8 stainless steel — standard size, won’t rust, and fits the hex key included in every box. Most showrooms have the rack up in under 20 minutes.
Natural stone slabs are heavy, irregular, and expensive to replace. The SRT905 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
The SRT302 is built for showrooms that handle large-format porcelain slabs daily. Its frame geometry distributes weight evenly across the rail system so panels glide without binding, even when loaded
Natural stone slabs are heavy, irregular, and expensive to replace. The SRT328 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
Stone importers tell us their biggest display headache is racks that develop a permanent lean toward the front. The ST025 has full-frame gusset plates at all four corners specifically to prevent this.
Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SRT115 slots accept the full thickness spectrum without adapter plates or shims.
When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The SRT114 presents each slab at a 7° tilt-back angle that keeps it stable without clampi
Humidity in stone warehouses can be extreme. The SRT113 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
Quartz, granite, and marble each have different weight characteristics. The SR112 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement at
Marble showrooms need display fixtures that match the elegance of the stone. The PY2018 matte black finish with clean geometric lines complements rather than competes with premium natural stone.
The PY2017 is built for showrooms that handle large-format porcelain slabs daily. Its frame geometry distributes weight evenly across the rail system so panels glide without binding, even when loaded
When your tile collection changes seasonally, your display system should keep up. The PY2016 uses adjustable slot brackets that reposition without tools — lift, slide, lock.
The rail system on the E039 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.
When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The SRT112 presents each slab at a 7° tilt-back angle that keeps it stable without clampi
Multi-category building material distributors face a constant challenge: how to display diverse products without buying separate display systems for each. The VB2008 solves that with modular, reconfig
We build the VB2007 from cold-rolled steel with the same cross-section specifications used in structural scaffolding. It is over-engineered for display, which means it handles years of reconfiguration
