Stone display stand for trade shows metal tile display rack-SW336
Showroom managers love the SW336 because samples stay clean longer — the angled display means less dust settles on the tile faces, reducing daily cleaning time.
Showing 361–380 of 2886 resultsSorted by latest

Showroom managers love the SW336 because samples stay clean longer — the angled display means less dust settles on the tile faces, reducing daily cleaning time.

The SW363 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.

We designed the SW361 after studying how contractors browse door displays. They open, close, check the reveal, and inspect the hardware. The rack must support all of that without loosening over time.

We pre-drill and tap every threaded insert on the SW343 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.

Each SW364 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.

The SW345 is built for showrooms that handle large-format porcelain slabs daily. Its frame geometry distributes weight evenly across the rail system so panels glide without binding, even when loaded t

If your sales team spends more time fetching samples from the back than talking to customers, the SW360 puts your entire collection at their fingertips — literally within arm’s reach of the consultati

The WL1021 is one of our most popular platforms because it solves the #1 flooring showroom problem: how to show 30 SKUs without making the space feel like a lumber yard.

Unlike welded display fixtures that ship in bulky crates, the MZ2109 packs flat to roughly 12% of its assembled volume. This cuts your freight cost and simplifies receiving.

Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The SG1007 undergoes a 72-hour salt spray test before it leaves our facility.

The SW017 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.

The WL996 is one of our most popular platforms because it solves the #1 flooring showroom problem: how to show 30 SKUs without making the space feel like a lumber yard.

Stone importers tell us their biggest display headache is racks that develop a permanent lean toward the front. The SG1006 has full-frame gusset plates at all four corners specifically to prevent this

Natural stone slabs are heavy, irregular, and expensive to replace. The CE021 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.

Quartz, granite, and marble each have different weight characteristics. The 1 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement at the

Flooring showrooms have a unique display challenge: planks look completely different horizontal versus vertical. The WL982 presents samples at a 12° angle — close enough to flat for accurate color per

Humidity in stone warehouses can be extreme. The SW337 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.

We manufacture the RACK with smooth-rolling industrial casters as standard because carpet showrooms rearrange their displays more often than any other flooring category.

Quartz, granite, and marble each have different weight characteristics. The SW358 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement at

Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The SW354 uses a staggered front-to-back layout that shows every slab face from a single aisl