Artificial tile display stand simple model custom production-sw125
Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The 52 undergoes a 72-hour salt spray test before it leaves our facility.
Showing 2581–2600 of 2795 resultsSorted by latest

Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The 52 undergoes a 72-hour salt spray test before it leaves our facility.

The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The STAND has gusseted corner plates and cross-braced rear panels that eliminate frame rackin

We manufacture the LAYOUT in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.

Stone importers tell us their biggest display headache is racks that develop a permanent lean toward the front. The SRL018 has full-frame gusset plates at all four corners specifically to prevent this

Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The SRL041 uses a staggered front-to-back layout that shows every slab face from a single ais

Showroom layouts change, product lines rotate, and display fixtures need to keep up. The DISPLAY is designed for disassembly and reassembly — every connection is a bolt, not a weld, so you can reconfi

Marble showrooms need display fixtures that match the elegance of the stone. The BOOK matte black finish with clean geometric lines complements rather than competes with premium natural stone.

The DISPLAYS uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.

Granite distributors appreciate that the STAND frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.

Granite distributors appreciate that the SRL125 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.

The STAND was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service 4

Assembly hardware for the RACKS is all M8 stainless steel — standard size, won’t rust, and fits the hex key included in every box. Most showrooms have the rack up in under 20 minutes.

The STANDS contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.

The STAND frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.

Quartz, granite, and marble each have different weight characteristics. The DISPLAYS slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement

We pre-drill and tap every threaded insert on the MZ2071 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.

Marble showrooms need display fixtures that match the elegance of the stone. The SRT008 matte black finish with clean geometric lines complements rather than competes with premium natural stone.

The SD101 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.

When your tile collection changes seasonally, your display system should keep up. The STANDS uses adjustable slot brackets that reposition without tools — lift, slide, lock.

Flooring showrooms have a unique display challenge: planks look completely different horizontal versus vertical. The WT903 presents samples at a 12° angle — close enough to flat for accurate color per