Showing 1–20 of 46 resultsSorted by latest
We manufacture the SRL104 with frame tolerances borrowed from industrial pallet racking. Not because display stands belong in warehouses, but because wobbling is unacceptable when presenting a $3,000
Natural stone slabs are heavy, irregular, and expensive to replace. The SRL052 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
The SAMPLE uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.
The RACK frame starts as cold-rolled steel tube, cut and welded on CNC jigs to maintain consistent slot spacing across every unit. No shims, no field adjustments needed.
Natural stone slabs are heavy, irregular, and expensive to replace. The IDEAS was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
Every CD107 ships with a printed assembly guide that uses only pictures — no English required. We have shipped to 50+ countries and the feedback on our instructions has been universally positive.
Combined display stand holds four full-size stone slabs side by side for direct texture comparison. Slim metal frame, neat layout, widely used in tile showrooms to display and contrast different marble and sintered stone styles.
Showrooms with mixed door types — interior, exterior, sliding, bi-fold — need display that works for all configurations. The STONE adjustable mounting points accept any standard door hinge pattern.
Natural stone slabs are heavy, irregular, and expensive to replace. The SRL151 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
The 2 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
Humidity in stone warehouses can be extreme. The SG806 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
The SRL043 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The SRL047 presents each slab at a 7° tilt-back angle that keeps it stable without clampi
We engineered the SR1212 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must n
Natural stone slabs are heavy, irregular, and expensive to replace. The IDEAS was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
Door displays need to communicate weight, swing, and finish simultaneously — a difficult brief for static display fixtures. The USA presents doors at a slight open angle so customers see both face and
We designed the SYSTEMS after visiting 30+ tile showrooms and noticing the same bottleneck: staff wasting time lifting heavy sample boards. This rack lets one person reorganize an entire display wall
When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The 86 presents each slab at a 7° tilt-back angle that keeps it stable without clamping.
Each 83 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.
We manufacture the 18 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
