wooden flooring combined display stand cabinet displays-WZ906
We tested the DISPLAYS in a 200-visitor-per-day flooring showroom for 6 months. The tier locks never slipped, the felt never compressed, and the frame showed zero signs of fatigue.
Showing 2541–2560 of 2720 resultsSorted by latest


We tested the DISPLAYS in a 200-visitor-per-day flooring showroom for 6 months. The tier locks never slipped, the felt never compressed, and the frame showed zero signs of fatigue.

Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The STAND slots accept the full thickness spectrum without adapter plates or shims.

Floor space in a retail showroom runs $20-50 per square foot. The WE970 holds up to 18 full-size tile samples in roughly 4 square feet — less than a standard pallet.

We pre-drill and tap every threaded insert on the 136 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.

Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The ML062 undergoes a 72-hour salt spray test before it leaves our facility.

The MF010 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.

Showroom managers love the MZ2086 because samples stay clean longer — the angled display means less dust settles on the tile faces, reducing daily cleaning time.

We pre-drill and tap every threaded insert on the BOOK before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.

We engineered the RACK center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must not

When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The BOOK presents each slab at a 7° tilt-back angle that keeps it stable without clamping

Unlike welded display fixtures that ship in bulky crates, the MF008 packs flat to roughly 12% of its assembled volume. This cuts your freight cost and simplifies receiving.

The 49 locking casters are TK-200 series — the same specification used in hospital equipment. Silent rolling, full-lock at pedal press, and rated for years of daily repositioning across hard floors.


The SG104 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service 4

Humidity in stone warehouses can be extreme. The SG2004 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.

We plate the E039 with a zinc-phosphate corrosion barrier before powder coating. It is the same three-stage finishing process used on outdoor architectural steel, because showroom humidity is just as

The rail system on the DISPLAY uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.


We pre-drill and tap every threaded insert on the IDEAS before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.

We plate the WL030 with a zinc-phosphate corrosion barrier before powder coating. It is the same three-stage finishing process used on outdoor architectural steel, because showroom humidity is just as

If your sales team spends more time fetching samples from the back than talking to customers, the 47 puts your entire collection at their fingertips — literally within arm’s reach of the consultation

Glass mosaic has a completely different visual profile from stone mosaic, and your display rack must work for both. The 13 EVA foam backing in neutral grey won’t tint or discolor even the lightest col