Showing 2761–2780 of 2795 resultsSorted by latest
The 503 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service 4 y
Seasonal flooring line changes are a reality for every distributor. The 915 lets you swap individual planks in seconds without disturbing adjacent samples — new season, new display, same rack.
We manufacture the 666 with the same frame tolerances used in commercial shelving systems. Not because display stands belong in warehouses, but because wobbling is unacceptable when clients are compar
Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The 657 slots accept the full thickness spectrum without adapter plates or shims.
Natural stone slabs are heavy, irregular, and expensive to replace. The 343 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
Quartz, granite, and marble each have different weight characteristics. The 816 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement at t
We manufacture the 311 with smooth-rolling industrial casters as standard because carpet showrooms rearrange their displays more often than any other flooring category.
Unlike display systems that become obsolete when you change product lines, the 418 is category-agnostic. It works equally well for hardwood, laminate, engineered wood, LVT, and bamboo planks.
We manufacture the 492 with frame tolerances borrowed from industrial pallet racking. Not because display stands belong in warehouses, but because wobbling is unacceptable when presenting a $3,000 mar
The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The 876 has gusseted corner plates and cross-braced rear panels that eliminate frame racking.
Multi-category building material distributors face a constant challenge: how to display diverse products without buying separate display systems for each. The 79 solves that with modular, reconfigurab
Natural hardwood varies dramatically in grain and tone from batch to batch. The 313 presents long edges forward so customers see the true character of each plank, not just a narrow face.
The 892 frame is engineered with a center of gravity 40% below the midpoint. Even with all sample panels pulled out simultaneously, the rack stays planted.
Unlike display systems that become obsolete when you change product lines, the 90 is category-agnostic. It works equally well for hardwood, laminate, engineered wood, LVT, and bamboo planks.
The DISPLAYS packs flat to 15% of its assembled volume, which means it ships via standard courier to any address worldwide — no freight forwarder required for sample orders.
We build the STAND from cold-rolled steel with the same cross-section specifications used in structural scaffolding. It is over-engineered for display, which means it handles years of reconfiguration
Quartz, granite, and marble each have different weight characteristics. The STAND slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement at
Humidity in stone warehouses can be extreme. The RACK powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
Floor space in a retail showroom runs $20-50 per square foot. The E051 holds up to 18 full-size tile samples in roughly 4 square feet — less than a standard pallet.
The SHOWROOM was field-tested for 18 months in a high-traffic Dubai showroom before we released the design. Every improvement between prototype and production came from watching real customers interac
