Showing 1381–1400 of 2886 resultsSorted by latest
We designed the CZ053 after visiting 30+ tile showrooms and noticing the same bottleneck: staff wasting time lifting heavy sample boards. This rack lets one person reorganize an entire display wall in
Assembly hardware for the CZ011 is all M8 stainless steel — standard size, won’t rust, and fits the hex key included in every box. Most showrooms have the rack up in under 20 minutes.
Every CE012 ships with a printed assembly guide that uses only pictures — no English required. We have shipped to 50+ countries and the feedback on our instructions has been universally positive.
The rail system on the CE926 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.
Floor space in a retail showroom runs $20-50 per square foot. The CE922 holds up to 18 full-size tile samples in roughly 4 square feet — less than a standard pallet.
Assembly hardware for the CT912 is all M8 stainless steel — standard size, won’t rust, and fits the hex key included in every box. Most showrooms have the rack up in under 20 minutes.
The rail system on the CE006 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.
The CT001 was field-tested for 18 months in a high-traffic Dubai showroom before we released the design. Every improvement between prototype and production came from watching real customers interact w
We manufacture the SRT013 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
Stone importers tell us their biggest display headache is racks that develop a permanent lean toward the front. The SRT021 has full-frame gusset plates at all four corners specifically to prevent this
Quartz, granite, and marble each have different weight characteristics. The SRT024 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement a
Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SRT035 slots accept the full thickness spectrum without adapter plates or shims.
Marble showrooms need display fixtures that match the elegance of the stone. The SRT049 matte black finish with clean geometric lines complements rather than competes with premium natural stone.
Humidity in stone warehouses can be extreme. The SRT065 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
We manufacture the SRT303 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
We manufacture the SRT304 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SRT325 slots accept the full thickness spectrum without adapter plates or shims.
Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The SRL908 uses a staggered front-to-back layout that shows every slab face from a single ais
When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The SRL909 presents each slab at a 7° tilt-back angle that keeps it stable without clampi
We engineered the SRL913 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must n