decorative ceramic tile display stands australia-srl150
The rail system on the SRL150 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.
Showing 1221–1240 of 2886 resultsSorted by latest

The rail system on the SRL150 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.

The SRL148 frame is engineered with a center of gravity 40% below the midpoint. Even with all sample panels pulled out simultaneously, the rack stays planted.

Quartz, granite, and marble each have different weight characteristics. The PB2010 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement a

The SRL147 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.

Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The PB2009 slots accept the full thickness spectrum without adapter plates or shims.

Stone importers tell us their biggest display headache is racks that develop a permanent lean toward the front. The 2 has full-frame gusset plates at all four corners specifically to prevent this.

Quartz, granite, and marble each have different weight characteristics. The PB2007 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement a

Each PB2006 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.

The CC913 is built for showrooms that handle large-format porcelain slabs daily. Its frame geometry distributes weight evenly across the rail system so panels glide without binding, even when loaded t

Granite distributors appreciate that the SG2012 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.

The SD905 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.

Multi-category building material distributors face a constant challenge: how to display diverse products without buying separate display systems for each. The SD904 solves that with modular, reconfigu

We pre-drill and tap every threaded insert on the CT607 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.

The SD903 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.

The SD113 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.

Stone importers tell us their biggest display headache is racks that develop a permanent lean toward the front. The SD902 has full-frame gusset plates at all four corners specifically to prevent this.

The SRT111 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service

If your sales team spends more time fetching samples from the back than talking to customers, the CC902 puts your entire collection at their fingertips — literally within arm’s reach of the consultati

The WC2034 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.

Flooring showrooms have a unique display challenge: planks look completely different horizontal versus vertical. The WWD053 presents samples at a 12° angle — close enough to flat for accurate color pe