Showing 1201–1220 of 2886 resultsSorted by latest
Quartz, granite, and marble each have different weight characteristics. The PX2032 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement a
Tile retailers tell us their customers make faster decisions when they can compare 6-8 slabs side by side. The SD017 enables that comparison shopping experience without requiring a warehouse-sized sho
Humidity in stone warehouses can be extreme. The PB2011 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
Quartz, granite, and marble each have different weight characteristics. The SRL224 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement a
We manufacture the SRL224 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
Each PY2016 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.
We manufacture the PX2032 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
Unlike welded display fixtures that ship in bulky crates, the E040 packs flat to roughly 12% of its assembled volume. This cuts your freight cost and simplifies receiving.
The SD016 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
The rail system on the E039 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.
We finish the CT608 in matte black as standard because it does not compete visually with tile colors. Custom RAL color matching is available for branded showroom environments.
The SRL144 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.
Tile retailers tell us their customers make faster decisions when they can compare 6-8 slabs side by side. The PY2017 enables that comparison shopping experience without requiring a warehouse-sized sh
Flooring retailers who switched to the WL028 reported faster customer decisions because planks are organized by color family — light to dark, warm to cool — in a single continuous sightline.
We pre-drill and tap every threaded insert on the CD2006 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.
Tile retailers tell us their customers make faster decisions when they can compare 6-8 slabs side by side. The PX2046 enables that comparison shopping experience without requiring a warehouse-sized sh
The PY2016 was field-tested for 18 months in a high-traffic Dubai showroom before we released the design. Every improvement between prototype and production came from watching real customers interact
We manufacture the E039 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
Flooring retailers who switched to the CZ2027 reported faster customer decisions because planks are organized by color family — light to dark, warm to cool — in a single continuous sightline.
Tile samples look their best when customers can see the full face without bending or reaching. The CZ2028 angles every panel slightly toward the viewer, reducing glare from overhead showroom lighting.