Showing 2521–2540 of 2886 resultsSorted by latest
Humidity in stone warehouses can be extreme. The SHOW powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
We manufacture the SG092 with frame tolerances borrowed from industrial pallet racking. Not because display stands belong in warehouses, but because wobbling is unacceptable when presenting a $3,000 m
The STAND was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service 4
We engineered the RACK center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must not
Granite distributors appreciate that the SG801 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.
We manufacture the SG507 with frame tolerances borrowed from industrial pallet racking. Not because display stands belong in warehouses, but because wobbling is unacceptable when presenting a $3,000 m
The SRT712 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service
The ST12 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
Granite distributors appreciate that the SRT083 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.
Every ST119 ships with a printed assembly guide that uses only pictures — no English required. We have shipped to 50+ countries and the feedback on our instructions has been universally positive.
Granite distributors appreciate that the WALLS frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.
Marble showrooms need display fixtures that match the elegance of the stone. The SG1017 matte black finish with clean geometric lines complements rather than competes with premium natural stone.
The SHOWROOM contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
Every SG048 ships with a printed assembly guide that uses only pictures — no English required. We have shipped to 50+ countries and the feedback on our instructions has been universally positive.
Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The LATCH uses a staggered front-to-back layout that shows every slab face from a single aisl
Unlike welded display fixtures that ship in bulky crates, the SW112 packs flat to roughly 12% of its assembled volume. This cuts your freight cost and simplifies receiving.
We plate the SG1006 with a zinc-phosphate corrosion barrier before powder coating. It is the same three-stage finishing process used on outdoor architectural steel, because showroom humidity is just a
Natural stone slabs are heavy, irregular, and expensive to replace. The 662 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
The SG1010 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
We manufacture the SG1012 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.