ceramic tile sample display stand-e2118
We designed the E2118 after visiting 30+ tile showrooms and noticing the same bottleneck: staff wasting time lifting heavy sample boards. This rack lets one person reorganize an entire display wall in
Showing 1981–2000 of 2795 resultsSorted by latest

We designed the E2118 after visiting 30+ tile showrooms and noticing the same bottleneck: staff wasting time lifting heavy sample boards. This rack lets one person reorganize an entire display wall in

Natural stone slabs are heavy, irregular, and expensive to replace. The SW2005 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.

The SRT2026 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.

We manufacture the SRT2027 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.

Granite distributors appreciate that the SRT2028 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.

Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The SRL2003 uses a staggered front-to-back layout that shows every slab face from a single ai

Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The SRT2013 uses a staggered front-to-back layout that shows every slab face from a single ai

Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The SRT2015 uses a staggered front-to-back layout that shows every slab face from a single ai

Quartz, granite, and marble each have different weight characteristics. The SRT2016 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement

Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SRT2003 slots accept the full thickness spectrum without adapter plates or shims.

Marble showrooms need display fixtures that match the elegance of the stone. The SRT2006 matte black finish with clean geometric lines complements rather than competes with premium natural stone.

The SRT2007 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.

Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The SRT2008 uses a staggered front-to-back layout that shows every slab face from a single ai

Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The SRT2009 uses a staggered front-to-back layout that shows every slab face from a single ai

We manufacture the SRL2033 with frame tolerances borrowed from industrial pallet racking. Not because display stands belong in warehouses, but because wobbling is unacceptable when presenting a $3,000

Quartz, granite, and marble each have different weight characteristics. The SRL2034 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement

Humidity in stone warehouses can be extreme. The SRL2035 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance

We engineered the SRL2036 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must

Granite distributors appreciate that the SRL2037 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.

Quartz, granite, and marble each have different weight characteristics. The SRL2039 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement