Showing 1921–1940 of 2720 resultsSorted by latest
When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The SRL2010 presents each slab at a 7° tilt-back angle that keeps it stable without clamp
The SRL2011 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
The SRL2012 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service
The SRL2013 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
The SRL2014 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service
Stone importers tell us their biggest display headache is racks that develop a permanent lean toward the front. The SRL2015 has full-frame gusset plates at all four corners specifically to prevent thi
The SRL2019 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
Humidity in stone warehouses can be extreme. The SRL2022 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance
We engineered the SRL2023 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must
The SRL2024 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
The SRL2025 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
Natural stone slabs are heavy, irregular, and expensive to replace. The SRL2027 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The SRL2028 uses a staggered front-to-back layout that shows every slab face from a single ai
Granite distributors appreciate that the SRL2029 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.
We manufacture the SRL2031 with frame tolerances borrowed from industrial pallet racking. Not because display stands belong in warehouses, but because wobbling is unacceptable when presenting a $3,000
Showroom layouts change, product lines rotate, and display fixtures need to keep up. The FD2012 is designed for disassembly and reassembly — every connection is a bolt, not a weld, so you can reconfig
Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The PY2017 slots accept the full thickness spectrum without adapter plates or shims.
We pre-thread every insert and include a color-coded hardware pack with the PZ2037. The first time you assemble one, you will appreciate that every bolt actually fits.
Glass mosaic has a completely different visual profile from stone mosaic, and your display rack must work for both. The PZ2002 EVA foam backing in neutral grey won’t tint or discolor even the lightest
We developed the PZ2038 after a Dubai mosaic distributor told us their biggest frustration: customers kept pulling sheets out of standard racks and dropping them. The enclosed-slot design eliminates l
