The 281 frame starts as cold-rolled steel tube, cut and welded on CNC jigs to maintain consistent slot spacing across every unit. No shims, no field adjustments needed.

Granite distributors appreciate that the 121 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.

The 503 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service 4 y

Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The 657 slots accept the full thickness spectrum without adapter plates or shims.

Natural stone slabs are heavy, irregular, and expensive to replace. The 343 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.

Quartz, granite, and marble each have different weight characteristics. The 816 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement at t

We manufacture the 492 with frame tolerances borrowed from industrial pallet racking. Not because display stands belong in warehouses, but because wobbling is unacceptable when presenting a $3,000 mar

The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The 876 has gusseted corner plates and cross-braced rear panels that eliminate frame racking.

The RACK frame is engineered with a center of gravity 40% below the midpoint. Even with all sample panels pulled out simultaneously, the rack stays planted.