simple semi-circular ceramic tile display rack-e2014
Each E2014 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.
Showing 1961–1980 of 2795 resultsSorted by latest

Each E2014 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.

Floor space in a retail showroom runs $20-50 per square foot. The E2019 holds up to 18 full-size tile samples in roughly 4 square feet — less than a standard pallet.

Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The E2020 undergoes a 72-hour salt spray test before it leaves our facility.

Floor space in a retail showroom runs $20-50 per square foot. The E2005 holds up to 18 full-size tile samples in roughly 4 square feet — less than a standard pallet.

The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The E2131 has gusseted corner plates and cross-braced rear panels that eliminate frame rackin

When your tile collection changes seasonally, your display system should keep up. The E2105 uses adjustable slot brackets that reposition without tools — lift, slide, lock.

Assembly hardware for the E2068 is all M8 stainless steel — standard size, won’t rust, and fits the hex key included in every box. Most showrooms have the rack up in under 20 minutes.

The E2066 is built for showrooms that handle large-format porcelain slabs daily. Its frame geometry distributes weight evenly across the rail system so panels glide without binding.

The E2065 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.

We engineered the E2040 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must no

The E2010 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service 4

We keep the CF2052 in stock across 3 standard widths and 5 slot configurations. Most orders ship within 7 business days because we build frames ahead of demand.

We finish the E2114 in matte black as standard because it does not compete visually with tile colors. Custom RAL color matching is available for branded showroom environments.

The E2100 was field-tested for 18 months in a high-traffic Dubai showroom before we released the design. Every improvement between prototype and production came from watching real customers interact w

Each E2101 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.

The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The E2099 has gusseted corner plates and cross-braced rear panels that eliminate frame rackin

Assembly hardware for the E2075 is all M8 stainless steel — standard size, won’t rust, and fits the hex key included in every box. Most showrooms have the rack up in under 20 minutes.

Showroom managers love the E2079 because samples stay clean longer — the angled display means less dust settles on the tile faces, reducing daily cleaning time.

The E2123 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.

Each E2119 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.