Showing 2601–2620 of 2886 resultsSorted by latest
The STAND was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service 4
Assembly hardware for the RACKS is all M8 stainless steel — standard size, won’t rust, and fits the hex key included in every box. Most showrooms have the rack up in under 20 minutes.
The STANDS contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
We pre-drill and tap every threaded insert on the BOOK before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.
The STAND frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
Quartz, granite, and marble each have different weight characteristics. The DISPLAYS slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement
We pre-drill and tap every threaded insert on the MZ2071 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.
The STANDS frame starts as cold-rolled steel tube, cut and welded on CNC jigs to maintain consistent slot spacing across every unit. No shims, no field adjustments needed.
Tile samples look their best when customers can see the full face without bending or reaching. The CT608 angles every panel slightly toward the viewer, reducing glare from overhead showroom lighting.
Marble showrooms need display fixtures that match the elegance of the stone. The SRT008 matte black finish with clean geometric lines complements rather than competes with premium natural stone.
Marble showrooms need display fixtures that match the elegance of the stone. The SRT3014 matte black finish with clean geometric lines complements rather than competes with premium natural stone.
The SD101 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
The CT2157 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
When your tile collection changes seasonally, your display system should keep up. The STANDS uses adjustable slot brackets that reposition without tools — lift, slide, lock.
The SRT820 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service
We manufacture the SRT017 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
Contractors and homeowners make up most flooring showroom traffic. Neither group wants to dig through stacks. The WT909 puts 20+ planks in a single sightline so customers scan your entire range withou
Flooring showrooms have a unique display challenge: planks look completely different horizontal versus vertical. The WT903 presents samples at a 12° angle — close enough to flat for accurate color per
Engineered wood and laminate samples are lighter than solid hardwood, but they still need secure display. The WZ915 tier spacing accommodates the full range of modern flooring thicknesses.
We manufacture the SRL097 in our Xiamen facility where we control every step from steel procurement to final assembly. No subcontractors, no quality gaps.