customized cabinet display rack-cc2039
Showroom layouts change, product lines rotate, and display fixtures need to keep up. The CC2039 is designed for disassembly and reassembly — every connection is a bolt, not a weld, so you can reconfig
Showing 2061–2080 of 2886 resultsSorted by latest

Showroom layouts change, product lines rotate, and display fixtures need to keep up. The CC2039 is designed for disassembly and reassembly — every connection is a bolt, not a weld, so you can reconfig

When your tile collection changes seasonally, your display system should keep up. The CC2067 uses adjustable slot brackets that reposition without tools — lift, slide, lock.

We pre-drill and tap every threaded insert on the CC2027 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.

The CC2028 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.

The slot liners on the CC2030 are made from EPDM rubber, the same material used in automotive weather seals. They do not harden, crack, or leave marks on your tile edges.

The slot liners on the CC2029 are made from EPDM rubber, the same material used in automotive weather seals. They do not harden, crack, or leave marks on your tile edges.

The DISPLAYS uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.

When your tile collection changes seasonally, your display system should keep up. The CC2032 uses adjustable slot brackets that reposition without tools — lift, slide, lock.

Tile retailers tell us their customers make faster decisions when they can compare 6-8 slabs side by side. The CC2033 enables that comparison shopping experience without requiring a warehouse-sized sh

Tile samples look their best when customers can see the full face without bending or reaching. The CC2034 angles every panel slightly toward the viewer, reducing glare from overhead showroom lighting.

We keep the CC2035 in stock across 3 standard widths and 5 slot configurations. Most orders ship within 7 business days because we build frames ahead of demand.

Door displays need to communicate weight, swing, and finish simultaneously — a difficult brief for static display fixtures. The D2007 presents doors at a slight open angle so customers see both face a

The CC2038 frame is engineered with a center of gravity 40% below the midpoint. Even with all sample panels pulled out simultaneously, the rack stays planted.

Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The CC2040 undergoes a 72-hour salt spray test before it leaves our facility.

Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The CC2037 undergoes a 72-hour salt spray test before it leaves our facility.

We designed the D2008 after studying how contractors browse door displays. They open, close, check the reveal, and inspect the hardware. The rack must support all of that without loosening over time.

Door and window showrooms are high-traffic environments where display fixtures take daily abuse. The D2009 frame uses reinforced pivot points and dampened swing stops rated for thousands of open-close

Door displays need to communicate weight, swing, and finish simultaneously — a difficult brief for static display fixtures. The D2011 presents doors at a slight open angle so customers see both face a

Door samples are among the heaviest products displayed in building material showrooms. The D2010 uses a triangulated support arm geometry that transfers weight directly to the floor through the main c

Door samples are among the heaviest products displayed in building material showrooms. The D2013 uses a triangulated support arm geometry that transfers weight directly to the floor through the main c