Showing 261–280 of 285 resultsSorted by latest
Seasonal flooring line changes are a reality for every distributor. The WE808 lets you swap individual planks in seconds without disturbing adjacent samples — new season, new display, same rack.
We tested the E050 in a 200-visitor-per-day flooring showroom for 6 months. The tier locks never slipped, the felt never compressed, and the frame showed zero signs of fatigue.
The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The STAND has gusseted corner plates and cross-braced rear panels that eliminate frame rackin
Flooring showrooms have a unique display challenge: planks look completely different horizontal versus vertical. The WT903 presents samples at a 12° angle — close enough to flat for accurate color per
We spent 8 months prototyping the DISPLAYS before releasing it. The breakthrough was the tier-adjustment mechanism — no bolts, no loose parts, just lift and click into one of 15 preset heights.
The SAMPLE packs flat to 15% of its assembled volume, which means it ships via standard courier to any address worldwide — no freight forwarder required for sample orders.
The SALE frame is finished in a neutral matte black that fades into the background, ensuring your flooring samples remain the visual focus — not the rack holding them.
We tested the DISPLAYS in a 200-visitor-per-day flooring showroom for 6 months. The tier locks never slipped, the felt never compressed, and the frame showed zero signs of fatigue.
Floor space in a retail showroom runs $20-50 per square foot. The WE970 holds up to 18 full-size tile samples in roughly 4 square feet — less than a standard pallet.
We pre-drill and tap every threaded insert on the 136 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.
The 49 locking casters are TK-200 series — the same specification used in hospital equipment. Silent rolling, full-lock at pedal press, and rated for years of daily repositioning across hard floors.
We plate the WL030 with a zinc-phosphate corrosion barrier before powder coating. It is the same three-stage finishing process used on outdoor architectural steel, because showroom humidity is just as
Seasonal flooring line changes are a reality for every distributor. The 162 lets you swap individual planks in seconds without disturbing adjacent samples — new season, new display, same rack.
We engineered the WL6025 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must n
The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The VERTICAL has gusseted corner plates and cross-braced rear panels that eliminate frame rac
The WL025 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.
Unlike welded display fixtures that ship in bulky crates, the WL029 packs flat to roughly 12% of its assembled volume. This cuts your freight cost and simplifies receiving.
The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The WL026 has gusseted corner plates and cross-braced rear panels that eliminate frame rackin
The rail system on the 407 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.
The 272 packs flat to 15% of its assembled volume, which means it ships via standard courier to any address worldwide — no freight forwarder required for sample orders.
