Showing 21–40 of 184 resultsSorted by latest
We manufacture the FRAME in our Xiamen facility where we control every step from steel procurement to final assembly. No subcontractors, no quality gaps.
Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The 679 uses a staggered front-to-back layout that shows every slab face from a single aisle.
The SHOWROOMS uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.
We pre-drill and tap every threaded insert on the SHOP before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.
The STAND uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.
The CT602 frame starts as cold-rolled steel tube, cut and welded on CNC jigs to maintain consistent slot spacing across every unit. No shims, no field adjustments needed.
We finish the CT608 in matte black as standard because it does not compete visually with tile colors. Custom RAL color matching is available for branded showroom environments.
Assembly hardware for the 481 is all M8 stainless steel — standard size, won’t rust, and fits the hex key included in every box. Most showrooms have the rack up in under 20 minutes.
The CT2143 locking casters are TK-200 series — the same specification used in hospital equipment. Silent rolling, full-lock at pedal press, and rated for years of daily repositioning across hard floor
We engineered the CT911 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must no
The CT2181 frame starts as cold-rolled steel tube, cut and welded on CNC jigs to maintain consistent slot spacing across every unit. No shims, no field adjustments needed.
Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The CT2146 undergoes a 72-hour salt spray test before it leaves our facility.
The STAND is built for showrooms that handle large-format porcelain slabs daily. Its frame geometry distributes weight evenly across the rail system so panels glide without binding, even when loaded t
Every STANDS ships with a printed assembly guide that uses only pictures — no English required. We have shipped to 50+ countries and the feedback on our instructions has been universally positive.
The CT2131 frame is engineered with a center of gravity 40% below the midpoint. Even with all sample panels pulled out simultaneously, the rack stays planted.
The 380 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
Tile samples look their best when customers can see the full face without bending or reaching. The CT921 angles every panel slightly toward the viewer, reducing glare from overhead showroom lighting.
Tile retailers tell us their customers make faster decisions when they can compare 6-8 slabs side by side. The CT2138 enables that comparison shopping experience without requiring a warehouse-sized sh
Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The SG1007 undergoes a 72-hour salt spray test before it leaves our facility.
Unlike welded display fixtures that ship in bulky crates, the 915 packs flat to roughly 12% of its assembled volume. This cuts your freight cost and simplifies receiving.
