Showing 41–58 of 58 resultsSorted by latest
We designed the SRL144 after visiting 30+ tile showrooms and noticing the same bottleneck: staff wasting time lifting heavy sample boards. This rack lets one person reorganize an entire display wall i
We manufacture the SRL018 in our Xiamen facility where we control every step from steel procurement to final assembly. No subcontractors, no quality gaps.
The E2022 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.
We designed the E2023 after visiting 30+ tile showrooms and noticing the same bottleneck: staff wasting time lifting heavy sample boards. This rack lets one person reorganize an entire display wall in
The E2004 was field-tested for 18 months in a high-traffic Dubai showroom before we released the design. Every improvement between prototype and production came from watching real customers interact w
Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The E2069 undergoes a 72-hour salt spray test before it leaves our facility.
Quartz, granite, and marble each have different weight characteristics. The SRT2029 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement
The SRL2013 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
Stone importers tell us their biggest display headache is racks that develop a permanent lean toward the front. The SRL2015 has full-frame gusset plates at all four corners specifically to prevent thi
We designed the E2158 after visiting 30+ tile showrooms and noticing the same bottleneck: staff wasting time lifting heavy sample boards. This rack lets one person reorganize an entire display wall in
We keep the E2125 in stock across 3 standard widths and 5 slot configurations. Most orders ship within 7 business days because we build frames ahead of demand.
The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The E2072 has gusseted corner plates and cross-braced rear panels that eliminate frame rackin
The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The E2128 has gusseted corner plates and cross-braced rear panels that eliminate frame rackin
We finish the E2058 in matte black as standard because it does not compete visually with tile colors. Custom RAL color matching is available for branded showroom environments.
The STAND was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service 4
The DISPLAYS was field-tested for 18 months in a high-traffic Dubai showroom before we released the design. Every improvement between prototype and production came from watching real customers interac
We pre-drill and tap every threaded insert on the STANDS before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.
The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The SHOWROOM has gusseted corner plates and cross-braced rear panels that eliminate frame rac