Showing 61–80 of 116 resultsSorted by latest
Not every showroom sells a single product category. The SW054 was designed for versatility — it handles tile, stone, wood, and laminate samples with equal reliability using interchangeable holder type
Quartz, granite, and marble each have different weight characteristics. The SRZ040 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement a
We engineered the SRZ028 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must n
The SRZ036 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
Humidity in stone warehouses can be extreme. The SRZ020 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
The SRZ012 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
Each E2003 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.
Humidity in stone warehouses can be extreme. The SRL097 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
The rail system on the CT607 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.
The SRL912 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
The SRL921 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service
Humidity in stone warehouses can be extreme. The SRL917 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
Natural stone slabs are heavy, irregular, and expensive to replace. The SRL2006 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
Natural stone slabs are heavy, irregular, and expensive to replace. The SW003 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
Humidity in stone warehouses can be extreme. The SW053 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SRL153 slots accept the full thickness spectrum without adapter plates or shims.
We manufacture the SRL150 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
Tile retailers tell us their customers make faster decisions when they can compare 6-8 slabs side by side. The SD017 enables that comparison shopping experience without requiring a warehouse-sized sho
The SRL920 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
Stone importers tell us their biggest display headache is racks that develop a permanent lean toward the front. The SRL921 has full-frame gusset plates at all four corners specifically to prevent this
