Showing 31–45 of 51 resultsSorted by latest
We designed the SRL017 after studying how contractors browse door displays. They open, close, check the reveal, and inspect the hardware. The rack must support all of that without loosening over time.
Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SR034 slots accept the full thickness spectrum without adapter plates or shims.
The MM2017 is built for showrooms that handle large-format porcelain slabs daily. Its frame geometry distributes weight evenly across the rail system so panels glide without binding, even when loaded
Natural stone slabs are heavy, irregular, and expensive to replace. The SR122 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
The SRL144 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.
The SRL148 frame is engineered with a center of gravity 40% below the midpoint. Even with all sample panels pulled out simultaneously, the rack stays planted.
The SRL147 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
Granite distributors appreciate that the SW108 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.
When your tile collection changes seasonally, your display system should keep up. The E2005 uses adjustable slot brackets that reposition without tools — lift, slide, lock.
Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SRL223 slots accept the full thickness spectrum without adapter plates or shims.
The slot liners on the E2005 are made from EPDM rubber, the same material used in automotive weather seals. They do not harden, crack, or leave marks on your tile edges.
The SD2034 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
Humidity in stone warehouses can be extreme. The SD2037 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The SD2058 presents each slab at a 7° tilt-back angle that keeps it stable without clampi
The SD2062 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service
