Showing 1681–1700 of 2720 resultsSorted by latest
Flooring retailers who switched to the WL028 reported faster customer decisions because planks are organized by color family — light to dark, warm to cool — in a single continuous sightline.
The PY2016 was field-tested for 18 months in a high-traffic Dubai showroom before we released the design. Every improvement between prototype and production came from watching real customers interact
We manufacture the E039 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
Flooring retailers who switched to the CZ2027 reported faster customer decisions because planks are organized by color family — light to dark, warm to cool — in a single continuous sightline.
Tile samples look their best when customers can see the full face without bending or reaching. The CZ2028 angles every panel slightly toward the viewer, reducing glare from overhead showroom lighting.
The rail system on the SRL150 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.
The SRL148 frame is engineered with a center of gravity 40% below the midpoint. Even with all sample panels pulled out simultaneously, the rack stays planted.
The SRL147 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
The CC913 is built for showrooms that handle large-format porcelain slabs daily. Its frame geometry distributes weight evenly across the rail system so panels glide without binding, even when loaded t
Granite distributors appreciate that the SG2012 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.
The SD905 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
Multi-category building material distributors face a constant challenge: how to display diverse products without buying separate display systems for each. The SD904 solves that with modular, reconfigu
The SD903 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
The SD113 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
Stone importers tell us their biggest display headache is racks that develop a permanent lean toward the front. The SD902 has full-frame gusset plates at all four corners specifically to prevent this.
If your sales team spends more time fetching samples from the back than talking to customers, the CC902 puts your entire collection at their fingertips — literally within arm’s reach of the consultati
The WC2034 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.
Flooring showrooms have a unique display challenge: planks look completely different horizontal versus vertical. The WWD053 presents samples at a 12° angle — close enough to flat for accurate color pe
Granite distributors appreciate that the SW108 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.
Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SW107 slots accept the full thickness spectrum without adapter plates or shims.
