two frame ceramic tile display rack-ct2218
We pre-drill and tap every threaded insert on the CT2218 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.
Showing 1641–1660 of 2720 resultsSorted by latest

We pre-drill and tap every threaded insert on the CT2218 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.

Tile samples look their best when customers can see the full face without bending or reaching. The CT2217 angles every panel slightly toward the viewer, reducing glare from overhead showroom lighting.

Tile samples look their best when customers can see the full face without bending or reaching. The CT2167 angles every panel slightly toward the viewer, reducing glare from overhead showroom lighting.

We pre-drill and tap every threaded insert on the CT2164 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.

The 88 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.

We manufacture the SRL152 in our Xiamen facility where we control every step from steel procurement to final assembly. No subcontractors, no quality gaps.

We manufacture the SRL150 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.

The RACK was field-tested for 18 months in a high-traffic Dubai showroom before we released the design. Every improvement between prototype and production came from watching real customers interact wi

Door displays need to communicate weight, swing, and finish simultaneously — a difficult brief for static display fixtures. The RACK presents doors at a slight open angle so customers see both face an

We manufacture the SHOPPING in our Xiamen facility where we control every step from steel procurement to final assembly. No subcontractors, no quality gaps.

We manufacture the CT614 in our Xiamen facility where we control every step from steel procurement to final assembly. No subcontractors, no quality gaps.




Tile samples look their best when customers can see the full face without bending or reaching. The DISPLAY angles every panel slightly toward the viewer, reducing glare from overhead showroom lighting


We engineered the 833 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must not


Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The 636 uses a staggered front-to-back layout that shows every slab face from a single aisle.

Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The CE082 undergoes a 72-hour salt spray test before it leaves our facility.

The slot liners on the E2011 are made from EPDM rubber, the same material used in automotive weather seals. They do not harden, crack, or leave marks on your tile edges.

Unlike welded display fixtures that ship in bulky crates, the E040 packs flat to roughly 12% of its assembled volume. This cuts your freight cost and simplifies receiving.


Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The SG1014 uses a staggered front-to-back layout that shows every slab face from a single ais

The E2001 was field-tested for 18 months in a high-traffic Dubai showroom before we released the design. Every improvement between prototype and production came from watching real customers interact w