marble display rack manufacturers-srl053
We manufacture the SRL053 with frame tolerances borrowed from industrial pallet racking. Not because display stands belong in warehouses, but because wobbling is unacceptable when presenting a $3,000
Showing 781–800 of 2720 resultsSorted by latest

We manufacture the SRL053 with frame tolerances borrowed from industrial pallet racking. Not because display stands belong in warehouses, but because wobbling is unacceptable when presenting a $3,000

Assembly hardware for the MM2015 is all M8 stainless steel — standard size, won’t rust, and fits the hex key included in every box. Most showrooms have the rack up in under 20 minutes.

Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The ML041 slots accept the full thickness spectrum without adapter plates or shims.

Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The ML037 slots accept the full thickness spectrum without adapter plates or shims.

When your tile collection changes seasonally, your display system should keep up. The ML023 uses adjustable slot brackets that reposition without tools — lift, slide, lock.

We engineered the CE082 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must no

The 053 is built for showrooms that handle large-format porcelain slabs daily. Its frame geometry distributes weight evenly across the rail system so panels glide without binding, even when loaded to

The FRAME uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.

We pre-drill and tap every threaded insert on the SRL597 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.

Door samples are among the heaviest products displayed in building material showrooms. The STAND uses a triangulated support arm geometry that transfers weight directly to the floor through the main c

The 11 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.

Tile samples look their best when customers can see the full face without bending or reaching. The 55 angles every panel slightly toward the viewer, reducing glare from overhead showroom lighting.

The 45 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service 4 ye

When your tile collection changes seasonally, your display system should keep up. The 43 uses adjustable slot brackets that reposition without tools — lift, slide, lock.

The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The 54 has gusseted corner plates and cross-braced rear panels that eliminate frame racking.

Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The 55 undergoes a 72-hour salt spray test before it leaves our facility.

Tile samples look their best when customers can see the full face without bending or reaching. The 56 angles every panel slightly toward the viewer, reducing glare from overhead showroom lighting.

When your tile collection changes seasonally, your display system should keep up. The 54 uses adjustable slot brackets that reposition without tools — lift, slide, lock.

Natural stone slabs are heavy, irregular, and expensive to replace. The 53 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.

Stone importers tell us their biggest display headache is racks that develop a permanent lean toward the front. The 51 has full-frame gusset plates at all four corners specifically to prevent this.