trendy quartz stone countertops display rack
Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SRT2021 slots accept the full thickness spectrum without adapter plates or shims.
Showing 621–640 of 2795 resultsSorted by latest

Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SRT2021 slots accept the full thickness spectrum without adapter plates or shims.

We engineered the SRT2022 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must

The STAND was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service 4

Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The SRT2002 uses a staggered front-to-back layout that shows every slab face from a single ai

Marble showrooms need display fixtures that match the elegance of the stone. The SRT2005 matte black finish with clean geometric lines complements rather than competes with premium natural stone.

Quartz, granite, and marble each have different weight characteristics. The SRT2010 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement

Window display requires transparency — the rack should be as invisible as possible. The D2001 uses minimalist clamping hardware and a dark matte finish that visually recedes behind glass and frame sam

We designed the D2002 after studying how contractors browse door displays. They open, close, check the reveal, and inspect the hardware. The rack must support all of that without loosening over time.

We designed the D2003 after studying how contractors browse door displays. They open, close, check the reveal, and inspect the hardware. The rack must support all of that without loosening over time.

Showrooms with mixed door types — interior, exterior, sliding, bi-fold — need display that works for all configurations. The D2004 adjustable mounting points accept any standard door hinge pattern.

Window display requires transparency — the rack should be as invisible as possible. The D2005 uses minimalist clamping hardware and a dark matte finish that visually recedes behind glass and frame sam

Door and window showrooms are high-traffic environments where display fixtures take daily abuse. The D2006 frame uses reinforced pivot points and dampened swing stops rated for thousands of open-close

Door and window showrooms are high-traffic environments where display fixtures take daily abuse. The W2001 frame uses reinforced pivot points and dampened swing stops rated for thousands of open-close

We designed the W2002 after studying how contractors browse door displays. They open, close, check the reveal, and inspect the hardware. The rack must support all of that without loosening over time.

Natural hardwood varies dramatically in grain and tone from batch to batch. The VL2011 presents long edges forward so customers see the true character of each plank, not just a narrow face.

The VL2001 uses a modular rail system that accepts eight different sample holder types. Swap from tile brackets to plank shelves in about 15 minutes with nothing more than the included hex key.

We build the VL2002 from cold-rolled steel with the same cross-section specifications used in structural scaffolding. It is over-engineered for display, which means it handles years of reconfiguration

Not every showroom sells a single product category. The VL2003 was designed for versatility — it handles tile, stone, wood, and laminate samples with equal reliability using interchangeable holder typ

Showroom layouts change, product lines rotate, and display fixtures need to keep up. The VL2004 is designed for disassembly and reassembly — every connection is a bolt, not a weld, so you can reconfig

We build the VL2005 from cold-rolled steel with the same cross-section specifications used in structural scaffolding. It is over-engineered for display, which means it handles years of reconfiguration