Showing 1341–1360 of 2720 resultsSorted by latest
We plate the SHOWROOM with a zinc-phosphate corrosion barrier before powder coating. It is the same three-stage finishing process used on outdoor architectural steel, because showroom humidity is just
The rail system on the 3 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.
We finish the CF100 in matte black as standard because it does not compete visually with tile colors. Custom RAL color matching is available for branded showroom environments.
The difference between a good sample presentation and a great one is how the pages turn. The CF201 uses a ring mechanism rated for 50,000 open-close cycles — years of daily client meetings without a l
Each RECLINING leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.
Each RACK leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.
Tile retailers tell us their customers make faster decisions when they can compare 6-8 slabs side by side. The BOX enables that comparison shopping experience without requiring a warehouse-sized showr
Tile retailers tell us their customers make faster decisions when they can compare 6-8 slabs side by side. The BOXES enables that comparison shopping experience without requiring a warehouse-sized sho
Rolled carpet display is all about density — how many SKUs can you show per linear meter. The BOX arranges rolls in a staggered pattern that maximizes visible face area while minimizing floor footprin
The BINDER uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.
The FOLDER frame is engineered with a center of gravity 40% below the midpoint. Even with all sample panels pulled out simultaneously, the rack stays planted.
We engineered the BOOK center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must not
Marble showrooms need display fixtures that match the elegance of the stone. The BOOK matte black finish with clean geometric lines complements rather than competes with premium natural stone.
The BOOK frame starts as cold-rolled steel tube, cut and welded on CNC jigs to maintain consistent slot spacing across every unit. No shims, no field adjustments needed.
We designed the BOOK after visiting 30+ tile showrooms and noticing the same bottleneck: staff wasting time lifting heavy sample boards. This rack lets one person reorganize an entire display wall in
The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The 12 has gusseted corner plates and cross-braced rear panels that eliminate frame racking.
Unlike welded display fixtures that ship in bulky crates, the 8 packs flat to roughly 12% of its assembled volume. This cuts your freight cost and simplifies receiving.
The 8 is built for showrooms that handle large-format porcelain slabs daily. Its frame geometry distributes weight evenly across the rail system so panels glide without binding, even when loaded to ca
Humidity in stone warehouses can be extreme. The 4 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
Humidity in stone warehouses can be extreme. The 8 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
