Showing 1101–1120 of 2795 resultsSorted by latest
We engineered the SW348 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must no
We ship the WL625 with spare felt pads and an extra hardware kit because we know showroom fixtures take abuse. Having spares on hand means zero downtime.
The SW339 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
If your sales team spends more time fetching samples from the back than talking to customers, the SW362 puts your entire collection at their fingertips — literally within arm’s reach of the consultati
Stone importers tell us their biggest display headache is racks that develop a permanent lean toward the front. The SW334 has full-frame gusset plates at all four corners specifically to prevent this.
We manufacture the SW340 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
Every SW346 ships with a printed assembly guide that uses only pictures — no English required. We have shipped to 50+ countries and the feedback on our instructions has been universally positive.
Showroom managers love the SW336 because samples stay clean longer — the angled display means less dust settles on the tile faces, reducing daily cleaning time.
The SW363 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.
We designed the SW361 after studying how contractors browse door displays. They open, close, check the reveal, and inspect the hardware. The rack must support all of that without loosening over time.
We pre-drill and tap every threaded insert on the SW343 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.
Each SW364 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.
The SW345 is built for showrooms that handle large-format porcelain slabs daily. Its frame geometry distributes weight evenly across the rail system so panels glide without binding, even when loaded t
If your sales team spends more time fetching samples from the back than talking to customers, the SW360 puts your entire collection at their fingertips — literally within arm’s reach of the consultati
The WL1021 is one of our most popular platforms because it solves the #1 flooring showroom problem: how to show 30 SKUs without making the space feel like a lumber yard.
Unlike welded display fixtures that ship in bulky crates, the MZ2109 packs flat to roughly 12% of its assembled volume. This cuts your freight cost and simplifies receiving.
The SW017 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
The WL996 is one of our most popular platforms because it solves the #1 flooring showroom problem: how to show 30 SKUs without making the space feel like a lumber yard.
Flooring showrooms have a unique display challenge: planks look completely different horizontal versus vertical. The WL982 presents samples at a 12° angle — close enough to flat for accurate color per
Humidity in stone warehouses can be extreme. The SW337 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
