Showing 441–460 of 2795 resultsSorted by latest
Door and window showrooms are high-traffic environments where display fixtures take daily abuse. The SZP031 frame uses reinforced pivot points and dampened swing stops rated for thousands of open-clos
The STAND uses a modular rail system that accepts eight different sample holder types. Swap from tile brackets to plank shelves in about 15 minutes with nothing more than the included hex key.
The 488 locking casters are TK-200 series — the same specification used in hospital equipment. Silent rolling, full-lock at pedal press, and rated for years of daily repositioning across hard floors.
Not every showroom sells a single product category. The 512 was designed for versatility — it handles tile, stone, wood, and laminate samples with equal reliability using interchangeable holder types.
Multi-category building material distributors face a constant challenge: how to display diverse products without buying separate display systems for each. The 10 solves that with modular, reconfigurab
The 454 was field-tested for 18 months in a high-traffic Dubai showroom before we released the design. Every improvement between prototype and production came from watching real customers interact wit
The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The 720 has gusseted corner plates and cross-braced rear panels that eliminate frame racking.
Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The 880 slots accept the full thickness spectrum without adapter plates or shims.
The 234 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service 4 y
Not every showroom sells a single product category. The 726 was designed for versatility — it handles tile, stone, wood, and laminate samples with equal reliability using interchangeable holder types.
Multi-category building material distributors face a constant challenge: how to display diverse products without buying separate display systems for each. The 721 solves that with modular, reconfigura
We manufacture the 501 in our Xiamen facility where we control every step from steel procurement to final assembly. No subcontractors, no quality gaps.
The 825 frame uses thick-gauge steel tube because carpet rolls are heavier than they look. A full rack of densely woven commercial carpet samples can weigh over 200kg.
Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The 373 uses a staggered front-to-back layout that shows every slab face from a single aisle.
Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The 878 uses a staggered front-to-back layout that shows every slab face from a single aisle.
We manufacture the 841 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
We engineered the 23 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must not m
Carpet showrooms face a unique issue: samples need to be touched. The 928 presents samples at hand height with enough clearance for customers to feel the pile, check the backing, and return the sample
We build the 855 from cold-rolled steel with the same cross-section specifications used in structural scaffolding. It is over-engineered for display, which means it handles years of reconfiguration wi
When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The 791 presents each slab at a 7° tilt-back angle that keeps it stable without clamping.
