pull-out ceramic tile display rack-ct2167
Tile samples look their best when customers can see the full face without bending or reaching. The CT2167 angles every panel slightly toward the viewer, reducing glare from overhead showroom lighting.
Showing 161–180 of 184 resultsSorted by latest

Tile samples look their best when customers can see the full face without bending or reaching. The CT2167 angles every panel slightly toward the viewer, reducing glare from overhead showroom lighting.

We pre-drill and tap every threaded insert on the CT2164 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.

The 88 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.

The RACK was field-tested for 18 months in a high-traffic Dubai showroom before we released the design. Every improvement between prototype and production came from watching real customers interact wi

Door displays need to communicate weight, swing, and finish simultaneously — a difficult brief for static display fixtures. The RACK presents doors at a slight open angle so customers see both face an

We manufacture the SHOPPING in our Xiamen facility where we control every step from steel procurement to final assembly. No subcontractors, no quality gaps.

We manufacture the CT614 in our Xiamen facility where we control every step from steel procurement to final assembly. No subcontractors, no quality gaps.

We manufacture the CT2166 in our Xiamen facility where we control every step from steel procurement to final assembly. No subcontractors, no quality gaps.

Every CT2130 ships with a printed assembly guide that uses only pictures — no English required. We have shipped to 50+ countries and the feedback on our instructions has been universally positive.

We keep the CT2163 in stock across 3 standard widths and 5 slot configurations. Most orders ship within 7 business days because we build frames ahead of demand.

Marble showrooms need display fixtures that match the elegance of the stone. The SD2030 matte black finish with clean geometric lines complements rather than competes with premium natural stone.

The SD2007 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service

Quartz, granite, and marble each have different weight characteristics. The SD2008 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement a

Granite distributors appreciate that the SD2010 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.

When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The SD2012 presents each slab at a 7° tilt-back angle that keeps it stable without clampi

Humidity in stone warehouses can be extreme. The SD2014 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.

The SD2017 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service

We manufacture the SD2018 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.

Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The SD2019 uses a staggered front-to-back layout that shows every slab face from a single ais

When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The SD2021 presents each slab at a 7° tilt-back angle that keeps it stable without clampi