Showing 61–80 of 114 resultsSorted by latest
The SRT712 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
We manufacture the SRT3014 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
The SRT008 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service
The slot liners on the FRAME are made from EPDM rubber, the same material used in automotive weather seals. They do not harden, crack, or leave marks on your tile edges.
We pre-drill and tap every threaded insert on the SRT036 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.
The slot liners on the SRT206 are made from EPDM rubber, the same material used in automotive weather seals. They do not harden, crack, or leave marks on your tile edges.
The SRT037 locking casters are TK-200 series — the same specification used in hospital equipment. Silent rolling, full-lock at pedal press, and rated for years of daily repositioning across hard floor
We engineered the SRT657 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must n
Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SRT260 slots accept the full thickness spectrum without adapter plates or shims.
We manufacture the SRT032 with frame tolerances borrowed from industrial pallet racking. Not because display stands belong in warehouses, but because wobbling is unacceptable when presenting a $3,000
The SRT068 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
Assembly hardware for the SRT040 is all M8 stainless steel — standard size, won’t rust, and fits the hex key included in every box. Most showrooms have the rack up in under 20 minutes.
Natural stone slabs are heavy, irregular, and expensive to replace. The SRT905 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
The SRT302 is built for showrooms that handle large-format porcelain slabs daily. Its frame geometry distributes weight evenly across the rail system so panels glide without binding, even when loaded
Natural stone slabs are heavy, irregular, and expensive to replace. The SRT328 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
The SRT806 frame is engineered with a center of gravity 40% below the midpoint. Even with all sample panels pulled out simultaneously, the rack stays planted.
Stone importers tell us their biggest display headache is racks that develop a permanent lean toward the front. The ST025 has full-frame gusset plates at all four corners specifically to prevent this.
Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SRT115 slots accept the full thickness spectrum without adapter plates or shims.
When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The SRT114 presents each slab at a 7° tilt-back angle that keeps it stable without clampi
Humidity in stone warehouses can be extreme. The SRT113 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
