Showing 1761–1780 of 2795 resultsSorted by latest
-

Unlike welded display fixtures that ship in bulky crates, the ML024 packs flat to roughly 12% of its assembled volume. This cuts your freight cost and simplifies receiving.
-

Floor space in a retail showroom runs $20-50 per square foot. The SRL224 holds up to 18 full-size tile samples in roughly 4 square feet — less than a standard pallet.
-

The E043 was field-tested for 18 months in a high-traffic Dubai showroom before we released the design. Every improvement between prototype and production came from watching real customers interact wi
-

Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The E041 undergoes a 72-hour salt spray test before it leaves our facility.
-

We keep the E039 in stock across 3 standard widths and 5 slot configurations. Most orders ship within 7 business days because we build frames ahead of demand.
-

Floor space in a retail showroom runs $20-50 per square foot. The WHOLESALE holds up to 18 full-size tile samples in roughly 4 square feet — less than a standard pallet.
-

The SD016 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
-

Floor space in a retail showroom runs $20-50 per square foot. The PZ2023 holds up to 18 full-size tile samples in roughly 4 square feet — less than a standard pallet.
-

Tile retailers tell us their customers make faster decisions when they can compare 6-8 slabs side by side. The SD017 enables that comparison shopping experience without requiring a warehouse-sized sho
-

Each PY2016 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.
-

The rail system on the E039 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.
-

The SRL144 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.
-

Tile retailers tell us their customers make faster decisions when they can compare 6-8 slabs side by side. The PY2017 enables that comparison shopping experience without requiring a warehouse-sized sh
-

Flooring retailers who switched to the WL028 reported faster customer decisions because planks are organized by color family — light to dark, warm to cool — in a single continuous sightline.
-

The PY2016 was field-tested for 18 months in a high-traffic Dubai showroom before we released the design. Every improvement between prototype and production came from watching real customers interact
-

We manufacture the E039 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
-

Flooring retailers who switched to the CZ2027 reported faster customer decisions because planks are organized by color family — light to dark, warm to cool — in a single continuous sightline.
-

Tile samples look their best when customers can see the full face without bending or reaching. The CZ2028 angles every panel slightly toward the viewer, reducing glare from overhead showroom lighting.
-

Ideal for tile showrooms, retail stores, distributors, and exhibition spaces, these tile display stands make it easy for customers to browse, compare, and select different tile designs.
-

The SRL148 frame is engineered with a center of gravity 40% below the midpoint. Even with all sample panels pulled out simultaneously, the rack stays planted.