Showing 141–160 of 235 resultsSorted by latest
Quartz, granite, and marble each have different weight characteristics. The SRL150 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement a
The SRL088 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
The SRL838 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
The SRL134 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
Marble showrooms need display fixtures that match the elegance of the stone. The SRL133 matte black finish with clean geometric lines complements rather than competes with premium natural stone.
Natural stone slabs are heavy, irregular, and expensive to replace. The SRL135 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
Quartz, granite, and marble each have different weight characteristics. The SRL136 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement a
Granite distributors appreciate that the SRL141 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.
The SRL144 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service
We manufacture the SRL145 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SRL146 slots accept the full thickness spectrum without adapter plates or shims.
Natural stone slabs are heavy, irregular, and expensive to replace. The SRL004 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
The E2022 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.
If your sales team spends more time fetching samples from the back than talking to customers, the E2015 puts your entire collection at their fingertips — literally within arm’s reach of the consultati
The E2065 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
We engineered the E2040 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must no
The E2010 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service 4
The E2100 was field-tested for 18 months in a high-traffic Dubai showroom before we released the design. Every improvement between prototype and production came from watching real customers interact w
The biggest complaint we heard from distributors was display racks that developed a ‘lean’ after 6 months. The E2099 has gusseted corner plates and cross-braced rear panels that eliminate frame rackin
The SRT2026 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
