samples hanging granite floor display-sg917
We manufacture the SG917 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
Showing 441–460 of 633 resultsSorted by latest

We manufacture the SG917 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.

Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SRL912 slots accept the full thickness spectrum without adapter plates or shims.

The rail system on the CE926 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.

Floor space in a retail showroom runs $20-50 per square foot. The CE922 holds up to 18 full-size tile samples in roughly 4 square feet — less than a standard pallet.

The rail system on the CE006 uses ball-bearing sliders rated at 10,000+ cycles. That is roughly 5 years of daily use in a busy showroom before any maintenance is needed.

The CX2004 frame starts as cold-rolled steel tube, cut and welded on CNC jigs to maintain consistent slot spacing across every unit. No shims, no field adjustments needed.

We pre-drill and tap every threaded insert on the CX2003 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.

When your tile collection changes seasonally, your display system should keep up. The CX2002 uses adjustable slot brackets that reposition without tools — lift, slide, lock.

We pre-drill and tap every threaded insert on the CX2001 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.

Unlike welded display fixtures that ship in bulky crates, the CX2022 packs flat to roughly 12% of its assembled volume. This cuts your freight cost and simplifies receiving.

The slot liners on the CX2024 are made from EPDM rubber, the same material used in automotive weather seals. They do not harden, crack, or leave marks on your tile edges.

We designed the CX2013 after visiting 30+ tile showrooms and noticing the same bottleneck: staff wasting time lifting heavy sample boards. This rack lets one person reorganize an entire display wall i

Each CX2025 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.

Each CX2011 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.

Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The CX2007 undergoes a 72-hour salt spray test before it leaves our facility.

Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The CX2008 undergoes a 72-hour salt spray test before it leaves our facility.

Tile retailers tell us their customers make faster decisions when they can compare 6-8 slabs side by side. The E2122 enables that comparison shopping experience without requiring a warehouse-sized sho

We plate the CF2044 with a zinc-phosphate corrosion barrier before powder coating. It is the same three-stage finishing process used on outdoor architectural steel, because showroom humidity is just a

Unlike welded display fixtures that ship in bulky crates, the E2032 packs flat to roughly 12% of its assembled volume. This cuts your freight cost and simplifies receiving.

The E2033 uprights are 45×45mm square tube with 2.5mm wall thickness. We publish the cross-section spec because we want you to compare it against anything else on the market.