Showing 21–40 of 60 resultsSorted by latest
Granite distributors appreciate that the SD103 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.
Marble showrooms need display fixtures that match the elegance of the stone. The SD055 matte black finish with clean geometric lines complements rather than competes with premium natural stone.
Floor space in a retail showroom runs $20-50 per square foot. The SRL224 holds up to 18 full-size tile samples in roughly 4 square feet — less than a standard pallet.
The SD905 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
Multi-category building material distributors face a constant challenge: how to display diverse products without buying separate display systems for each. The SD904 solves that with modular, reconfigu
The SD903 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
The SD113 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
Stone importers tell us their biggest display headache is racks that develop a permanent lean toward the front. The SD902 has full-frame gusset plates at all four corners specifically to prevent this.
The SD101 contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.
Marble showrooms need display fixtures that match the elegance of the stone. The SD096 matte black finish with clean geometric lines complements rather than competes with premium natural stone.
Granite distributors appreciate that the SD095 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.
We manufacture the SD096 with frame tolerances borrowed from industrial pallet racking. Not because display stands belong in warehouses, but because wobbling is unacceptable when presenting a $3,000 m
Quartz, granite, and marble each have different weight characteristics. The SD094 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement at
The SD092 was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in service 4
When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The SD091 presents each slab at a 7° tilt-back angle that keeps it stable without clampin
Humidity in stone warehouses can be extreme. The SD081 powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
Quartz, granite, and marble each have different weight characteristics. The SD071 slot geometry was optimized for the average density range of natural and engineered stone, with extra reinforcement at
Granite distributors appreciate that the SD041 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.
Showrooms in coastal cities face salt-air corrosion that eats standard powder coat in under a year. The SD035 undergoes a 72-hour salt spray test before it leaves our facility.
Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SD040 slots accept the full thickness spectrum without adapter plates or shims.
